Each thermostat can cover up to 23sqm.
Bathroom Kits come in sizes upto 8sqm, select the kit size to cover your “free floor” area only, ie: Do not include area under sink, toilet, vanity, etc and 100mm away from walls.
The in-screed floor heating cables are approx. 6mm in diameter and carry 20 watts per linear metre. They are designed to be installed in a thin-screed of approx 10-30mm and are usually fixed down to the existing slab with a fine galvanized mesh or specialised fixing clips.
They act as a direct floor heating system & are ideal for new bathrooms & most bathroom renovations.
Advantages of In-Screed Floor Heating:
• Very low risk of damage by tiler
• Suitable for most floor coverings, but mostly tiles & stone
• Digital thermostat control
• Suitable for bathrooms & living areas.
NOTE: This product can be DIY installed but must be connected by a licensed electrical contractor and conntected to a Thermostat and RCD to comply with current AS/NZS 3000 wiring regulations.
If you have a wooden sub-floor you will need to lay tile backer board prior to installation of the cable mats.